Whats the best course of action if your DVD burner can burn, but its stop reading the stuff youve burnt?

Is there some way to fix it? Or do I gotta buy a new one?

Your problem is more of a technical one. I am going to put my suggestions, but let BLINDZ take a look at it for you.

I think you need to either manually, or with a cleaning disk, clean the drive. Failing that I'd say change the cables, update the firmware, and check for issues online with similar model burners. Check your MTBF and see if it's done it's time. Before doing anything at all though, check to see if it will read originals. If it does, then see which other brand disks it will read. Check your burnt disks to see if they read in other machines. If your disks read in other machines it could be a problem with the burner, or with Windows. If it doesn't read in other machines, and yours can't read original disks, then your burner may be bad and the suggestions before should be followed. Failing those, then get a new drive.

PeAcE.

Thanx.. will try your suggestions.

BLINDZ!!!! Take note!!!!